Unified selection

The purpose of unified selection is to act as a single source of truth of what is selected in an iTwin.js application.


Selection levels

By default, whenever a component changes unified selection, that happens at 0th (top) selection level. And similarly, whenever a component requests current selection from the storage, by default the top selection level is used. However, there are cases when we want to have multiple levels of selection.

For example, let's say there're 3 components: A, B and C:

  • Component A shows a list of elements and allows selecting them.
  • Component B shows a list of elements selected in Component A and allows selecting them individually. Selecting an individual element should not change selection in Component A or content in Component B itself.
  • Component C shows properties of elements selected either in Component A or Component B.

The behavior described above can't be achieved using just one level of selection, because as soon as selection is made in Component B, that selection would get represented in Component A and Component B would change what it's displaying to the individual element.

That can be fixed by introducing another selection level, but before the components can be configured, here are a few key facts about selection levels:

  • Higher level selection has lower index. So top level selection is 0, lower level is 1, and so on.
  • Changing higher level selection clears all lower level selections.
  • Lower level selection doesn't have to be a sub-set of higher level selection.

With that in mind, the above components A, B and C can be configured as follows:

  • Component A only cares about top level selection. Whenever something is selected in the component, unified selection is updated at the top level. Similarly, whenever unified selection changes, the component only reacts if that happened at the top level.
  • Component B reloads its content if the selection changes at the top level. Row selection is handled using lower level, so selecting a row doesn't affect Component A's selection or Component B's content.
  • Component C reloads its content no matter the selection level.

Selection handling

The @itwin/presentation-components package delivers helper APIs for hooking four primary components into unified selection: Tree, Table, Property Grid and Viewport. Each of those components handle unified selection differently and that behavior is explained in the below sections.


Tree components show a hierarchy of nodes. In case of unified selection-enabled tree, the nodes are expected to represent some kind of ECInstance (a Model, Element or basically anything from the EC world).

The rules for interacting with unified selection are very simple in this case:

  • when unified selection changes, we mark nodes as selected if ECInstances they represent are in the unified selection storage
  • when a node is selected, we add ECInstance represented by the node to unified selection storage

In short, this is similar to how Component A works in the selection levels example.

See Setting up a Tree component for Unified Selection page for an example.


Table is a component that displays data in a table layout. In the context of EC it's used to display ECInstance properties - one column per property, one row per ECInstance.

The rules for interacting with unified selection are:

  • when unified selection changes at the 0th level, we load properties for selected ECInstances.
  • when unified selection changes at the 1st level, we highlight rows that represent selected ECInstances.
  • when a row is selected, we add the ECInstance it represents to unified selection at the 1st level.

In short, this is similar to how Component B works in the selection levels example.

See Setting up a Table component for Unified Selection page for an example.

Property grid

Property grid is a component that can show multiple categorized property label - value pairs. In the context of EC, it shows properties of one ECInstance. It can also show properties of multiple ECInstances by merging them into one before displaying.

The property grid has no way to change the selection and reacts to unified selection changes by simply displaying properties of ECInstances that got selected during the last selection change (no matter the selection level).

In short, this is similar to how Component C works in the selection levels example.

See Setting up a Property Grid component for Unified Selection page for an example.


The Viewport component is used to display graphical BisCore.Element ECInstances simply called Elements. The component handles a container called the highlight (or often just hilite) set to represent selected elements.

The rules for interacting with unified selection are:

  • when unified selection changes at the 0th level, we create a hilite set for the current selection and ask the viewport to hilite it.
  • when an element is selected in the viewport, we compute the selection based on selection scope and add that to our unified selection storage at the top level.

The two key concepts - hilite set and selection scope are explained next.

See Setting up a Viewport component for Unified Selection page for an example.

Hilite set

This is a set of IDs that we want hilited for a given selection. The IDs are separated by type (model, sub-category and element) which is determined based on the types of ECInstances in selection and presentation rules to create the hilite set.

The rules are as follows:

  • for BisCore.Subject return IDs of all models that are recursively under that Subject
  • for BisCore.Model just return its ID
  • for BisCore.PhysicalPartition just return ID of a model that models it
  • for BisCore.Category return IDs of all its SubCategories
  • for BisCore.SubCategory just return its ID
  • for BisCore.GeometricElement return ID of its own and all its child elements recursively

So for example when unified selection contains a subject, the hilite set for it will contain all models under that subject, it's child subjects, their child subjects, etc. Given such hilite set, the viewport component will hilite all elements in those models.

Selection scopes

Selection scopes allow decoupling of what gets picked and what gets selected. Without selection scopes, whenever a user picks an element in the viewport, its ID goes straight into unified selection storage. With selection scopes we can modify that and add something different. The input to selection scopes' processor is element IDs and scope to apply, and the output is element keys (class name + element ID). We get the input when user picks some elements in the viewport, run that through selection scope processor and put the output into unified selection storage.

Here are the scopes we support at the moment:

  • element - return key of selected element
  • assembly - return key of selected element's parent element (or just the element if it has no parent)
  • top-assembly - return key of selected element's topmost parent element (or just the element if it has no parents)
  • category - return key of element's category
  • model - return key of element's model


The key unified selection APIs are defined in @itwin/presentation-frontend package:

  • SelectionManager is where the selection is stored, it allows retrieving current selection, modifying it and listening to its changes. Accessed globally on the frontend through Presentation.selection accessor.
  • SelectionScopesManager helps with selection scopes, it may be used to get available selection scopes and compute selection given input element IDs and desired selection scope. Accessed globally through Presentation.selection.scopes accessor.
  • HiliteSetProvider helps with computing hilite sets for the given selection. The provider may be created on demand whenever a hilite set for custom input needs to be computed. For the current selection stored in SelectionManager, it's recommended to use the SelectionManager.getHiliteSet method.

For each type of component described in selection handling section, the @itwin/presentation-component package delivers a set of React-based helper APIs:

See examples section for how to use each of these APIs.


There are two selection-related APIs named very similarly: SelectionSet (accessed through IModelConnection.selectionSet) and SelectionManager (accessed through Presentation.selection). Not only they're named similarly, but also work very similarly as well. And to make matters worse, they're somewhat synchronized.

The SelectionManager, is a single global storage of what's currently selected in the application. It allows selecting any ECInstance (model, category, graphical element or even an ECClass!) and can be used without a viewport.

The SelectionSet, on the other hand, is what the tools (the ones used in the viewport) think is selected. It's like a viewport-specific selection which doesn't necessarily have to match the global selection, similar how the tree component maintains it's list of selected nodes. It only maintains graphical elements and only makes sense in a context of a viewport (or multiple of them, since SelectionSets are shared across all viewports associated with the same IModelConnection).

When unified selection is enabled on a viewport component, we start synchronizing the two sets so picking an element in the viewport puts it into global selection (after going through all the selection scopes processing) and putting something into unified selection gets selected in the SelectionSet so it can be used by tools in the viewport.

Generally, if an application uses unified selection, it should be interacting with SelectionManager API. Here're a few example issues that may arise due to interacting with SelectionSet:

  • selection works fine with a viewport, but stops working if a viewport is not created
  • adding a (non-graphical) element to selection doesn't select it in other components
  • etc.


External resources

Last Updated: 15 May, 2024